TP-Link T1600G-52PS - Show Ip Source Binding; Show Ip Dhcp Snooping

75
T1600G-52TS(config-if)#ip dhcp snooping decline rate 20
10.12 show ip source binding
Description
The show ip source binding command is used to display the IP-MAC-VID-
PORT binding table.
Syntax
show ip source binding
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the IP-MAC-VID-PORT binding table:
T1600G-52TS(config)#show ip source binding
10.13 show ip dhcp snooping
Description
The show ip dhcp snooping command is used to display the running status
of DHCP Snooping.
Syntax
show ip dhcp snooping
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the running status of DHCP Snooping: