TP-Link T1600G-52PS Cli Reference Guide

119
16.8 show mac address-table
Description
The show mac address-table command is used to display the information of
all address entries.
Syntax
show mac address-table [ dynamic | static | filtering ]
Parameter
dynamic | static | filtering —— The type of your desired entry. By default all
the entries are displayed.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the information of all address entries:
T1600G-52TS(config)# show mac address-table
16.9 clear mac address-table
Description
The show mac address-table command is used to clear the specified
address entries.
Syntax
clear mac address-table { dynamic | static | filtering }
Parameter
dynamic | static | filtering —— The type of your desired entry.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.

TP-Link T1600G-52PS Specifications

General

Brand	TP-Link
Model	T1600G-52PS
Category	Switch
Language	English