TP-Link T1600G-52PS - Ip Dhcp Snooping Vlan

68
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable the DHCP Snooping function globally:
T1600G-52TS(config)#ip dhcp snooping
10.3 ip dhcp snooping vlan
Description
The ip dhcp snooping vlan command is used to enable DHCP Snooping
function on a specified VLAN. To disable DHCP Snooping function on this
VLAN, please use no ip dhcp snooping vlan command.
Syntax
ip dhcp snooping vlan vlan-range
no ip dhcp snooping vlan
vlan-range
Parameter
vlan-range —— Specify the VLANs to enable the DHCP snooping function, in
the format of 1-3, 5.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable the DHCP Snooping function on VLAN 1,4,6-7:
T1600G-52TS(config)#ip dhcp snooping vlan 1,4,6-7