TP-Link T1600G-52PS - Ipv6 Mld Filter

268
Command Mode
Profile Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Configure one of the filter multicast address entry as range ff80::1234 to
ff80::1235 in profile 1:
T1600G-52TS(config)# ipv6 mld profile 1
T1600G-52TS(config-mld-profile)#range ff80::1234 ff80::1235
28.22 ipv6 mld filter
Description
The ipv6 mld filter command is used to bind the specified profile to the
interface. To delete the binding, please use no ipv6 mld filter command.
Syntax
ipv6 mld filter profile-id
no ipv6 mld filter
Parameter
profile-id —— Specify the profile ID, ranging from 1 to 999.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet / interface port-channel / interface range port-channel)
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Bind profile 1 to interface gigabitEthernet 1/0/2:
T1600G-52TS(config)# interface gigabitEthernet 1/0/2
T1600G-52TS(config-if)# ipv6 mld filter 1