TP-Link T1600G-52PS - Ipv6 Routing

317
next - hop-address —— The address of the next-hop.
distance —— The distance metric of this route, ranging from 1 to 255. The
smaller the distance is, the higher the priority is.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Create a static route with the destination IP address as 192.168.2.0, the
subnet mask as 255.255.255.0 and the next-hop address as 192.168.0.2:
T1600G-52TS(config)# ip route 192.168.2.0 255.255.255.0 192.168.0.2
32.9 ipv6 routing
Description
This ipv6 routing command is enale the IPv6 routing feature globally. To
diable IPv6 routing, please use the no ipv6 routing command.
Syntax
ipv6 routing
no ipv6 routing
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable IPv6 routing globally:
T1600G-52TS(config)# ipv6 routing