TP-Link T1600G-52PS Cli Reference Guide

102
T1600G-52TS(config)#dot1x system-auth-control
15.2 dot1x handshake
Description
The dot1x handshake command is used to enable the handshake feature.
The handshake feature is used to detect the connection status between the
TP-Link 802.1x supplicant and the switch. Please disable the handshake
feature if you are using a non-TP-Link 802.1x-compliant client software. This
feature is enabled by default.
Syntax
dot1x handshake
no dot1x handshake
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Disable the 802.1X handshake function:
T1600G-52TS(config)# no dot1x handshake
15.3 dot1x auth-method
Description
The dot1x auth-method command is used to configure the Authentication
Method of IEEE 802.1X and the default 802.1x authentication method is “eap”.
To restore to the default 802.1x authentication method, please use no dot1x
auth-method command.
Syntax
dot1x auth-method { pap | eap }
no dot1x auth-method

TP-Link T1600G-52PS Specifications

General

Brand	TP-Link
Model	T1600G-52PS
Category	Switch
Language	English