TP-Link T1600G-52PS Cli Reference Guide

123
16.15 show mac address-table vlan
Description
The show mac address-table vlan command is used to display the MAC
address configuration of the specified vlan.
Syntax
show mac address-table vlan vid
Parameter
vid ——The specified VLAN id.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the MAC address configuration of vlan 1:
T1600G-52TS(config)# show mac address-table vlan 1
16.16 show mac address-table notification
Description
The show mac address-table notification command is used to display the
MAC notificaiton configuration globally or on the specified port.
Syntax
show mac address-table notification { all | interface gigabitEthernet port }
Parameter
all —— Displays the notificaiton information globally and of all the Ethernet
ports.
port —— Displays the notification information on the specified port.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the notificaiton configuration of all the ports:

TP-Link T1600G-52PS Specifications

General

Brand	TP-Link
Model	T1600G-52PS
Category	Switch
Language	English