TP-Link T1600G-52PS - Ip Igmp Snooping Immediate-Leave; Ip Igmp Snooping Drop-Unknown

232
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable the IGMP report suppression function:
T1600G-52TS(config)# ip igmp snooping report-suppression
27.6 ip igmp snooping immediate-leave
Description
The ip igmp snooping immediate-leave command is used to configure the
Fast Leave function for port. To disable the Fast Leave function, please use
no ip igmp snooping immediate-leave command.
Syntax
ip igmp snooping immediate-leave
no ip igmp snooping immediate-leave
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet / interface port-channel / interface range port-channel)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable the Fast Leave function for port 1/0/3:
T1600G-52TS(config)# interface gigabitEthernet 1/0/3
T1600G-52TS(config-if)# ip igmp snooping immediate-leave
27.7 ip igmp snooping drop-unknown
Description
The ip igmp snooping drop-unknown command is used to process the
unknown multicast as discard. To disable the operation of processing the
unknown multicast as discard, please use no ip igmp snooping
drop-unknown command.