113
16.2 mac address-table aging-time
Description
The mac address-table aging-time command is used to configure aging
time for the dynamic address. To return to the default configuration, please
use no mac address-table aging-time command.
Syntax
mac address-table aging-time
aging-time
no mac address-table aging-time
Parameter
aging-time
—— The aging time for the dynamic address. The value of it can
be 0 or ranges from 10 to 630 seconds. When 0 is entered, the Auto Aging
function is disabled. It is 300 by default.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the aging time as 500 seconds:
T1600G-52TS(config)# mac address-table aging-time 500
16.3 mac address-table filtering
Description
The mac address-table filtering command is used to add the filtering
address entry. To delete the corresponding entry, please use no mac
address-table filtering command. The filtering address function is to forbid
the undesired package to be forwarded. The filtering address can be added
or removed manually, independent of the aging time.
Syntax
mac address-table filtering
mac-addr
vid
vid
To Next Page
Loading...
Need help?
General