TP-Link T1600G-52PS Cli Reference Guide

122
Syntax
show mac address-table count [ vlan vlan-id ]
Parameter
vlan- id —— Specify the VLAN which the MAC entries belong to.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the total MAC entry information in different VLANs:
T1600G-52TS(config)# show mac address-table count
16.14 show mac address-table address
Description
The show mac address-table address command is used to display the
information of the specified MAC address.
Syntax
show mac address-table address mac-addr [ interface { gigabitEthernet
port | port-channel lagid } | vid vlan-id ]
Parameter
mac-addr ——The specified MAC address.
port —— The Ethernet port number.
lagid —— The ID of the LAG.
vlan-id —— Specify the VLAN which the entry belongs to.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the information of the MAC address 00:00:00:00:23:00 in VLAN 1:
T1600G-52TS(config)#show mac address-table address 00:00:00:00:23:00
vid 1

TP-Link T1600G-52PS Specifications

General

PoE Ports	48
Switching Capacity	104 Gbps
Forwarding Rate	77.4Mpps
PoE Budget	384 W
Power Supply	AC 100-240V, 50/60Hz
Mounting	Rack Mountable
MAC Address Table	16K
Jumbo Frame	9KB
Packet Buffer Memory	4 MB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 90% non-condensing
Layer	Layer 2+
Dimensions (W x D x H)	440 x 44 x 44 mm
Standards and Protocols	IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at
Quality of Service	8 queues per port
VLAN	4K VLANs
Management	Web-based, SNMP
Security	802.1X
Ports	48 x 10/100/1000 Mbps RJ45 ports, 4 x 1G SFP slots