345
Parameter
ip-address
—— DHCP Server address.
Command Mode
Interface Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Add DHCP Server address 192.168.2.1 to interface VLAN 1:
T1600G-52TS(config)# interface vlan 1
T1600G-52TS(config-if)# ip helper-address 192.168.2.1
35.3 ip dhcp relay information
Description
The ip dhcp relay information command is used to enable option 82 support
in DHCP Relay. To disable this function, please use no ip dhcp relay
information command.
Syntax
ip dhcp relay information
no ip dhcp relay information
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable option 82 support in DHCP Relay:
T1600G-52TS(config)# ip dhcp relay information
To Next Page
Loading...
