266
28.18 ipv6 mld profile
Description
The ipv6 mld profile command is used to create the configuration profile. To
delete the corresponding profile, please use no ipv6 mld profile command.
Syntax
ipv6 mld profile
id
no ipv6 mld profile
id
Parameter
id
—— Specify the id of the configuration profile, ranging from 1 to 999.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Create the profile 1:
T1600G-52TS(config)# ipv6 mld profile 1
28.19 deny
Description
The deny command is used to configure the filtering mode of profile as deny.
Syntax
deny
Command Mode
Profile Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Configure the filtering mode of profile 1 as deny:
To Next Page
Loading...
Need help?
General