TP-Link T1600G-52PS Cli Reference Guide

323
32.18 show ipv6 route
Description
This show ipv6 route command is used to display the IPv6 route entries of
the specified type.
Syntax
show ipv6 route [ static | connected ]
Parameter
static | connected —— Specify the route type. If not specified, all types of
route entries will be displayed.
static: The static routes.
connected: The connected routes.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the IPv6 static routes:
T1600G-52TS(config)# show ipv6 route static
32.19 show ipv6 route summary
Description
This show ipv6 route summary command is used to display the summary
information of the IPv6 route entries classified by their sources.
Syntax
show ipv6 route summary
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.

TP-Link T1600G-52PS Specifications

General

Brand	TP-Link
Model	T1600G-52PS
Category	Switch
Language	English