TP-Link T1600G-52PS Cli Reference Guide

305
30.12 show lldp
Description
The show lldp command is used to display the global configuration of LLDP.
Syntax
show lldp
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the global configuration of LLDP:
T1600G-52TS#show lldp
30.13 show lldp interface
Description
The show lldp interface command is used to display LLDP configuration of
the corresponding port. By default, the LLDP configuration of all the ports will
be displayed.
Syntax
show lldp interface [ gigabitEthernet port ]
Parameters
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the LLDP configuration of Gigabit Ethernet port 1/0/1:
T1600G-52TS#show lldp interface gigabitEthernet 1/0/1

TP-Link T1600G-52PS Specifications

General

Brand	TP-Link
Model	T1600G-52PS
Category	Switch
Language	English