334
Parameter
method-list
—— Specify the method list name.
method1, method2, method3, method4
—— Specify the authentication
methods in order. The next authentication method is tried only if the previous
method does not respond, not if it fails.
The preset methods include radius, tacacs, local and none. “radius” means
the RADIUS server group “radius”; “tacacs” means the RACACS+ server
group “tacacs”; “local” means local username database are used; “none”
means no authentication is used for login.
Users can aslo define new method with the aaa group
command.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
User Guidelines
By default the login authentication method list is “default” with “local” as
method1.
Example
Configure a login authentication method list “list1” with the priority1 method
as radius and priority2 method as local:
T1600G-52TS(config)# aaa authenticaiton login list1 radius local
34.10 aaa authentication enable
Description
This aaa authentication enable command is used to configure a privilege
authentication method list. A method list describes the authentication
methods and their sequence to elevate a user’s privilege. To delete the
specified authentication method list, please use the no aaa authentication
enable command.
Syntax
aaa authentication enable {
method-list
} {
method1
} [
method2
] [
method3
]
[
method4
]
no authentication enable
method-list
To Next Page
Loading...
Need help?
General