338
Example
Display the information of the default 802.1X accounting method list:
T1600G-52TS(config)# show aaa accounting
34.15 line telnet
Description
The line telnet command is used to enter the Line Configuration Mode to
configure the telnet terminal line to which you want to apply the
authentication list.
Syntax
line telnet
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Enter the telnet terminal line configuration mode:
T1600G-52TS(config)#line telnet
34.16 login authentication(telnet)
Description
The login authentication command is used to apply the login authentication
method list to the telnet terminal line. To restore to the default authentication
method list, please use the no login authentication command.
Syntax
login authentication {
method-list
}
no login authentication
Parameter
method-list
—— Specify the login method list on the telnet terminal line. It is
“default” by default, which contains the method “local”.
To Next Page
Loading...
Need help?
General