TP-Link T1600G-52PS - Show Ip Interface Brief; Show Ip Route

320
32.13 show ip interface brief
Description
This show ip interface brief command is used to display the summary
information of the Layer 3 interfaces.
Syntax
show ip interface brief
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the summary information of the Layer 3 interfaces:
T1600G-52TS(config)# show ip interface brief
32.14 show ip route
Description
This show ip route command is used to display the route entries of the
specified type.
Syntax
show ip route [ static | connected ]
Parameter
static | connected —— Specify the route type. If not specified, all types of
route entries will be displayed.
static: The static routes.
connected: The connected routes.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.