TP-Link T1600G-52PS - 4. Appendix: Default Parameters

186
Chapter 24 ACL Commands
24.1 access-list create
Description
The access-list create command is used to create standard-IP ACL,
extend-IP ACL and the IPv6 ACL.
Syntax
access-list create access-list-num
Parameter
access-list-num —— ACL ID, ranging from 500 to 2499. The ID range of
Standard-IP ACL ranges is 500-1499, the Extend-IP ACL is 1500-2499 and
the IPv6 ACL is 3500-4499.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Create a standard-IP ACL whose ID is 523:
T1600G-52TS(config)# access-list create 523
24.2 mac access-list
Description
The mac access-list command is used to create MAC ACL. To set the
detailed configurations for a specified MAC ACL, please use mac access-list
command to access Mac Access-list Configuration Mode. To delete the MAC
ACL, please use no mac access-list.
Syntax
mac access-list access-list-num
no mac access-list
access-list-num