TP-Link T1600G-52PS - Show Mac-Vlan Interface

30
Privilege Requirement
None.
Parameter
mac-addr —— MAC address, in the format of XX:XX:XX:XX:XX:XX.
vlan-id —— Specify IEEE 802.1Q VLAN ID, ranging from 1 to 4094.
Example
Display the information of all the MAC-based VLAN entry:
T1600G-52TS(config)#show mac-vlan all
4.4 show mac-vlan interface
Description
The show mac-vlan interface command is used to display the port state of
MAC-based VLAN.
Syntax
show mac-vlan interface
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the enable state of all the ports:
T1600G-52TS(config)#show mac-vlan interface