64
9.10 ip http secure-server download key
Description
The ip http secure-server download key command is used to download an
SSL key to the switch from TFTP server.
Syntax
ip http secure-server download key
ssl-key
ip-address
ip-addr
Parameter
ssl-key
—— The name of the SSL key which is selected to download to the
switch. The length of the name ranges from 1 to 25 characters. The Key must
be BASE64 encoded.
ip-addr
—— The IP address of the TFTP server. Both IPv4 and IPv6 addresses
are supported, for example 192.168.0.1 or fe80::1234.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Download an SSL key named ssl-key from TFTP server with the IP address of
192.168.0.146:
T1600G-52TS(config)# ip http secure-server download key ssl-key
ip-address 192.168.0.146
Download an SSL key named ssl-key from TFTP server with the IP address of
fe80::1234
T1600G-52TS(config)# ip http secure-server download key ssl-key
ip-address fe80::1234
To Next Page
Loading...
Need help?
General