TP-Link T1600G-52PS - Show Interface Counters; Show Interface Configuration

163
19.14 show interface counters
Description
The show interface counters command is used to display the statistics
information of all ports/LAGs.
Syntax
show interface counters [ gigabitEthernet port ] [ port-channel lagid ]
Parameter
port —— The Ethernet port number.
lagid —— The ID of the LAG.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the statistics information of all Ethernet ports and LAGs:
T1600G-52TS(config)# show interface counters
Display the statistics information of port 1/0/2:
T1600G-52TS(config)# show interface counters gigabitEthernet 1/0/2
19.15 show interface configuration
Description
The show interface configuration command is used to display the
configurations of all ports and LAGs, including Port-status, Flow Control,
Negotiation Mode and Port-description.
Syntax
show interface configuration [ gigabitEthernet port ] [ port-channel lagid ]
Parameter
port —— The Ethernet port number.
lagid —— The ID of the LAG.
Command Mode
Privileged EXEC Mode and Any Configuration Mode