TP-Link T1600G-52PS Cli Reference Guide

66
Chapter 10 Binding Table Commands
You can bind the IP address, MAC address, VLAN and the connected Port number of the Host
together, which can be the condition for the ARP Inspection to filter the packets.
10.1 ip source binding
Description
The ip source binding command is used to bind the IP address, MAC address,
VLAN ID and the Port number together manually.
You can manually bind the
IP address, MAC address, VLAN ID and the Port number together in the
condition that you have got the related information of the Hosts in the LAN.
To delete the IP-MAC–VID-PORT entry from the binding table, please use no
ip source binding index command.
Syntax
ip source binding hostname ip-addr mac-addr vlan vlan-id interface
gigabitEthernet port { none | arp-detection } [ forced-source {arp-scanning |
dhcp-snooping} ]
no ip source binding index
idx
Parameter
hostname ——The Host Name, which contains 20 characters at most.
ip-addr —— The IP address of the Host.
mac-addr —— The MAC address of the Host.
vlan-id ——The VLAN ID needed to be bound, ranging from 1 to 4094.
port —— The number of port connected to the Host.
none | arp-detection ——The protect type for the entry. “none” indicates
applying none; “arp-detection” indicates ARP detection.
forced-source —— The source of the binding entry can be specified as
“arp-scanning” or “dhcp-snooping”. It is multi-optional.
idx —— The entry number needed to be deleted. You can use the show ip
source binding command to get the idx. Pay attention that the entry number
is the actual number in the binding table which is not display in an arranged
order.

TP-Link T1600G-52PS Specifications

General

Brand	TP-Link
Model	T1600G-52PS
Category	Switch
Language	English