58
9.2 ip http max-users
Description
The ip http max-users command is used to configure the maximum number
of users that are allowed to connect to the HTTP server. To cancel this
limitation, please use no ip http max-users command.
Syntax
ip http max-users
admin-num guest-num
no ip http max-users
Parameter
admin-num
—— The maximum number of the users logging on to the HTTP
server as Admin, ranging from 1 to 16. The total number of Admin and Guest
should be less than 16.
guest-num
—— The maximum number of the users logging on to the HTTP
server as Guest, ranging from 0 to 15.The total number of Admin and Guest
should be less than 16.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Configure the maximum number of the Admin and Guest users logging on to
the HTTP server as 5 and 3:
T1600G-52TS(config)# ip http max-users 5 3
9.3 ip http session timeout
Description
The ip http session timeout command is used to configure the connection
timeout of the HTTP server. To restore to the default timeout time, please use
no ip http session timeout command.
Syntax
ip http session timeout
minutes
To Next Page
Loading...
Need help?
General