TP-Link T1600G-52PS Cli Reference Guide

188
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Create a Standard-IP ACL whose ID is 520, and add Rule 10 for it. In the rule,
the source IP address is 192.168.0.100, the source IP address mask is
255.255.255.0, and the packets match this rule will be forwarded by the
switch:
T1600G-52TS(config)# access-list create 520
T1600G-52TS(config)# access-list standard 520 rule 10 permit sip
192.168.0.100 smask 255.255.255.0
24.4 access-list extended
Description
The access-list extended command is used to add Extended-IP ACL rule. To
delete the corresponding rule, please use no access-list extended
command.
Syntax
access-list extended acl-id rule rule-id { deny | permit } [[ sip source-ip ]
smask
source-ip-mask ] [[ dip destination-ip ] dmask destination-ip-mask ]
[ s-port
s-port ] [ d-port d-port ] [ protocol protocol ]
no access-list extended
acl-id rule rule-id
Parameter
acl-id ——The desired Extended-IP ACL for configuration.
rule-id —— The rule ID.
deny —— The operation to discard packets.
permit ——The operation to forward packets. It is the default value.
source-ip —— The source IP address contained in the rule.
source-ip-mask —— The source IP address mask. It is required if you typed
the source IP address.
destination-ip —— The destination IP address contained in the rule.

TP-Link T1600G-52PS Specifications

General

Brand	TP-Link
Model	T1600G-52PS
Category	Switch
Language	English