TP-Link T1600G-52PS Cli Reference Guide

259
port-list —— The list of Ethernet ports.
lagid
—— The ID of the LAGs.
ip
—— The static multicast IP address.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Enable the MLD Snooping function and modify Router Port Time as 300
seconds, Member Port Time as 200 seconds for VLAN 1-3, and set the router
port as 1/0/1 for VLAN 1-2:
T1600G-52TS(config)# ipv6 mld snooping vlan-config 1-3 rtime 300
T1600G-52TS(config)# ipv6 mld snooping vlan-config 1-3 mtime 200
T1600G-52TS(config)# ipv6 mld snooping vlan-config 1-2 rport interface
gigabitEthernet 1/0/1
Add static multicast IP address ff01::1234:01, which corresponds to VLAN 2,
and configure the forward ports as ports 1/0/1-3:
T1600G-52TS(config)# ipv6 mld snooping vlan-config 2 static
ff01::1234:01 interface gigabitEthernet 1/0/1-3
28.11 ipv6 mld snooping vlan-config
(router-ports-forbidden)
Description
This command is used to forbid the specified ports as being router ports in
the specified VLAN(s). To delete the forbidden router ports, please use no
ipv6 mld snooping vlan-config
vlan-id-list router-ports-forbidden
command.
Syntax
ipv6 mld snooping vlan-config vlan-id-list router-ports-forbidden
interface { gigabitEthernet
port-list | port-channel port-channel-id }
no ipv6 mld snooping vlan-config
vlan-id-list router-ports-forbidden
interface [ gigabitEthernet
port-list | port-channel port-channel-id ]

TP-Link T1600G-52PS Specifications

General

Brand	TP-Link
Model	T1600G-52PS
Category	Switch
Language	English