TP-Link T1600G-52PS - Access-List Bind Acl(Interface); Access-List Bind Acl(Vlan)

193
24.9 access-list bind acl(interface)
Description
The access-list bind acl command is used to bind an ACL to the specified
port. To cancel the bind relation, please use no access-list bind acl
command.
Syntax
access-list bind acl acl-id
no access-list bind acl
acl-id
Parameter
acl-id —— The ID of the ACL desired to bind.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Bind ACL 100 to port 1/0/2:
T1600G-52TS(config)# interface gigabitEthernet 1/0/2
T1600G-52TS(config-if)# access-list bind acl 100
24.10 access-list bind acl(vlan)
Description
The access-list bind acl command is used to bind an ACL to the specified
VLAN. To cancel the bind relation, please use no access-list bind acl
command.
Syntax
access-list bind acl acl-id
no access-list bind acl
acl-id
Parameter
acl-id —— The ID of the ACL desired to bind.