103
Parameter
pap | eap ——Authentication Methods.
pap: EAP termination mode. IEEE 802.1X authentication system uses
extensible authentication protocol (EAP) to exchange information between
the switch and the client. The EAP packets are terminated at the switch and
repackaged in the Password Authentication Protocol (PAP) packets, and then
transferred to the RADIUS server.
eap: EAP relay mode. IEEE 802.1X authentication system uses extensible
authentication protocol (EAP) to exchange information between the switch
and the client. The EAP protocol packets with authentication data are
encapsulated in the advanced protocol (such as RADIUS) packets and
transmitted to the authentication server.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the Authentication Method of IEEE 802.1X as “pap”:
T1600G-52TS(config)#dot1x auth-method pap
15.4 dot1x accounting
Description
The dot1x accounting command is used to enable the IEEE 802.1X
accounting function globally. To disable the enable the IEEE 802.1X
accounting function, please use no dot1x accounting command.
Syntax
dot1x accounting
no dot1x accounting
Command Mode
Global Configuration Mode
To Next Page
Loading...
Need help?
General