TP-Link T1600G-52PS Cli Reference Guide

343
Parameter
method-list —— Specify the enable method list on the HTTP access. It is
“default” by default, which contains the method “none”.
Command Mode
Line Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Configure the enable authentication method list on the HTTP access as
“list2”:
T1600G-52TS(config)# ip http enable authentication list2
34.23 show aaa global
Description
This show aaa global command is used to display global status of AAA
function and the login/enable method lists of different application modules:
telnet, ssh and HTTP.
Syntax
show aaa global
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Display the AAA function’s global status and each application’s method list:
T1600G-52TS(config)# show aaa global

TP-Link T1600G-52PS Specifications

General

Brand	TP-Link
Model	T1600G-52PS
Category	Switch
Language	English