TP-Link T1600G-52PS - Show Storm-Control; Show Bandwidth

164
Privilege Requirement
None.
Example
Display the configurations of all Ethernet ports and LAGs:
T1600G-52TS(config)# show interface configuration
Display the configurations of port 1/0/2:
T1600G-52TS(config)# show interface configuration gigabitEthernet 1/0/2
19.16 show storm-control
Description
The show storm-control command is used to display the storm-control
information of Ethernet ports.
Syntax
show storm-control interface [ gigabitEthernet port-list ] [ port-channel
lagid-list ]
Parameter
port-list ——The list of Ethernet ports.
lagid-list —— The list of LAGs.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the storm-control information of port 1/0/4-7:
T1600G-52TS(config)# show storm-control interface gigabitEthernet
1/0/4-7
19.17 show bandwidth
Description
The show bandwidth command is used to display the bandwidth-limit
information of Ethernet ports.