TP-Link T1600G-52PS Cli Reference Guide

95
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the log information from level 0 to level 5 in the log buffer:
T1600G-52TS(config)# show logging buffer level 5
13.13 show logging flash
Description
The show logging flash command is used to display the log information in
the log file according to the severity level.
Syntax
show logging flash [ level level ]
Parameter
level —— Severity level. There are 8 severity levels marked with values 0-7.
The information of levels with priority not lower than the select level will
display. Display all the log information in the log file by default.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the log information with the level marked 0~3 in the log file:
T1600G-52TS(config)# show logging flash level 3

TP-Link T1600G-52PS Specifications

General

Brand	TP-Link
Model	T1600G-52PS
Category	Switch
Language	English