243
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
User Guidelines
The IGMP Authentication feature will take effect only when AAA function is
enabled and the RADIUS server is configured. For how to enable AAA function
and configure RADIUS server, please refer to aaa enable and
radius-server
host.
Example
Enable IGMP authentication on port 1/0/3:
T1600G-52TS(config)# interface gigabitEthernet 1/0/3
T1600G-52TS(config-if)# ip igmp snooping authentication
27.19 ip igmp snooping accounting
Description
The ip igmp snooping accounting command is used to enable IGMP
accounting globally. To disable the IGMP accouting, please use no ip igmp
snooping accounting command.
Syntax
ip igmp snooping accounting
no ip igmp snooping accounting
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable IGMP accounting globally:
T1600G-52TS(config)# ip igmp snooping accounting
To Next Page
Loading...
Need help?
General