TP-Link T1600G-52PS - Show Startup-Config; Show System-Time

144
Example
Display the system current operating configuration:
T1600G-52TS# show running-config
17.26 show startup-config
Description
The show startup-config command is used to display the current
configuration saved in the switch. These configuration settings will not be lost
the next time you reboot the switch.
Syntax
show startup-config
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Display the saved configuration:
T1600G-52TS# show startup-config
17.27 show system-time
Description
The show system-time command is used to display the time information of
the switch.
Syntax
show system-time
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the time information of the switch