262
no ipv6 mld snooping multi-vlan-config router-ports-forbidden [ interface
{ gigabitEthernet
port-list
| port-channel
port-channel-id
}
]
Parameter
vlan-id
——The ID of the multicast VLAN, ranging from 2 to 4094.
port-list
—— Forbid the specified ports as being router ports. Packets sent
from multicast routers to these ports will be discarded.
port-channel-id
—— Forbid the specified port-channels as being router ports.
Packets sent from multicast routers to these port-channels will be discarded.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Forbid the Ethernet ports 1/0/1-3 as being router ports in multicast VLAN 2 :
T1600G-52TS(config)# ipv6 mld snooping multi-vlan-config 2
router-ports-forbidden interface gigabitEthernet 1/0/1-3
28.14 ipv6 mld snooping multi-vlan-config
(source-ip-replace)
Description
This command is used to replace the multicast source IP address of the MLD
packets in the specified multicast VLAN. To delete the forbidden router ports,
please use no ipv6 mld snooping multi-vlan-config replace-sourceip
command.
Syntax
ipv6 mld snooping multi-vlan-config [
vlan-id
] replace-sourceip
ip
no ipv6 mld snooping multi-vlan-config replace-sourceip
Parameter
vlan-id
——The ID of the multicast VLAN, ranging from 2 to 4094.
ip
—— Specify the IP address. The switch will use this IP address to replace
the source IP address of the MLD packets.
Command Mode
Global Configuration Mode
To Next Page
Loading...
