137
T1600G-52TS# copy startup-config tftp ip-address 192.168.0.148
filename
config
Backup the configuration files to TFTP server with the IP fe80::1234 and name
this file config.cfg:
T1600G-52TS# copy startup-config tftp ip-address fe80::1234 filename
config
17.16 copy tftp startup-config
Description
The copy tftp startup-config command is used to download the
configuration file to the switch from TFTP server.
Syntax
copy tftp startup-config ip-address
ip-addr
filename
name
Parameter
ip-addr
—— IP Address of the TFTP server. Both IPv4 and IPv6 addresses are
supported, for example 192.168.0.1 or fe80::1234.
name
—— Specify the name for the configuration file which would be
downloaded.
Command Mode
Privileged EXEC Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Download the configuration file named as config.cfg to the switch from TFTP
server with the IP 192.168.0.148:
T1600G-52TS# copy tftp startup-config ip-address 192.168.0.148
filename
config
Download the configuration file named as config.cfg to the switch from TFTP
server with the IP fe80::1234
T1600G-52TS# copy tftp startup-config ip-address fe80::1234
filename
config
To Next Page
Loading...
Need help?
General