TP-Link T1600G-52PS Cli Reference Guide

234
27.9 ip igmp snooping last-listener query-count
Description
The ip igmp snooping last-listener query-count command is used to
specify the numbers of Specific Query Message to be sent. The default value
is 2. To restore the default number, please use no ip igmp snooping
last-listener query-count command.
Syntax
ip igmp snooping last-listener query-count num
no ip igmp snooping last-listener query-count
Parameter
num —— Specify the numbers of Specific Query Message to be sent, ranging
from 1 to 5.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Specify the number of Specific Query Message to 3:
T1600G-52TS(config)# ip igmp snooping last-listener query-count 3
27.10 ip igmp snooping vlan-config
Description
The ip igmp snooping vlan-config command is used to enable VLAN IGMP
Snooping function or to modify IGMP Snooping parameters, and to create
static multicast IP entry. To disable the VLAN IGMP Snooping function, please
use no ip igmp snooping vlan-config command. To restore the default
values, please use no ip igmp snooping vlan-config with specified
parameters.
Syntax
ip igmp snooping vlan-config vlan-id-list [ rtime router-time | mtime
member-time | rport interface { gigabitEthernet port-list | port-channel
lagid } ]
ip igmp snooping vlan-config
vlan-id-list static ip interface
{ gigabitEthernet
port-list | port-channel lagid }

TP-Link T1600G-52PS Specifications

General

Brand	TP-Link
Model	T1600G-52PS
Category	Switch
Language	English