104
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable the enable the IEEE 802.1X accounting function globally:
T1600G-52TS(config)#dot1x accounting
15.5 dot1x guest-vlan(global)
Description
The dot1x guest-vlan command is used to enable the Guest VLAN function
globally. To disable the Guest VLAN function, please use no dot1x
guest-vlan command.
Syntax
dot1x guest-vlan
vid
no dot1x guest-vlan
Parameter
vid
—— The VLAN ID needed to enable the Guest VLAN function, ranging
from 2 to 4094.
The supplicants in the Guest VLAN can access the specified
network sources.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable the Guest VLAN function for VLAN 5:
T1600G-52TS(config)#dot1x guest-vlan 5
To Next Page
Loading...
