TP-Link T1600G-52PS Cli Reference Guide

348
35.7 ip dhcp relay information remote-id
Description
The ip dhcp relay information remote-id command is used to specify the
custom remote ID when option 82 customization is enabled. To clear the
remote ID, please use no ip dhcp relay information remote-id command.
Syntax
ip dhcp relay information remote-id remoteID
no ip dhcp relay information remote-id
Parameter
remoteID —— Specify the remote ID, ranging from 1 to 64 characters.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Specify the remote ID as “TP-Link”:
T1600G-52TS(config)# ip dhcp relay information remote-id TP-Link
35.8 show ip dhcp relay
Description
The show ip dhcp relay command is used to display the global status and
Option 82 configuration of DHCP Relay.
Syntax
show ip dhcp relay
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.

TP-Link T1600G-52PS Specifications

General

Brand	TP-Link
Model	T1600G-52PS
Category	Switch
Language	English