TP-Link T1600G-52PS - Show Dot1 X Global; Show Dot1 X Interface

110
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the Control Type for Gigabit Ethernet port 1/0/20 as “port-based”:
T1600G-52TS(config)#interface gigabitEthernet 1/0/20
T1600G-52TS(config-if)#dot1x port-method port-based
15.13 show dot1x global
Description
The show dot1x global command is used to display the global configuration
of 802.1X.
Syntax
show dot1x global
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the configuration of 802.1X globally:
T1600G-52TS(config)#show dot1x global
15.14 show dot1x interface
Description
The show dot1x interface command is used to display all ports or the
specified port’s configuration information of 802.1X.