TP-Link T1600G-52PS Cli Reference Guide

205
Example
Bind the PoE profile named “IP Camera” to port 2:
T1600G-52PS(config)# interface gigabitEthernet 1/0/2
T1600G-52PS(config-if)# power inline profile “IP Camera”
25.12 power inline time-range
Description
The power inline time-range command is used to bind a PoE time-range to
the corresponding port. To cancel the bind relation, please use no power
inline time-range command.
Syntax
power inline time-range name
no power inline time-range
Parameter
name —— The name of the PoE time-range to be bound to the port.
Command Mode
Interface Configuration Mode
Example
Bind the PoE time-range named “tRange2" to port 2:
T1600G-52PS(config)# interface gigabitEthernet 1/0/2
T1600G-52PS(config-if)# power inline time-range tRange2
25.13 show power inline
Description
The show power inline command is used to display the global PoE
information of the system.
Syntax
show power inline
Command Mode
Privileged EXEC Mode and Any Configuration Mode

TP-Link T1600G-52PS Specifications

General

PoE Ports	48
Switching Capacity	104 Gbps
Forwarding Rate	77.4Mpps
PoE Budget	384 W
Power Supply	AC 100-240V, 50/60Hz
Mounting	Rack Mountable
MAC Address Table	16K
Jumbo Frame	9KB
Packet Buffer Memory	4 MB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 90% non-condensing
Layer	Layer 2+
Dimensions (W x D x H)	440 x 44 x 44 mm
Standards and Protocols	IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at
Quality of Service	8 queues per port
VLAN	4K VLANs
Management	Web-based, SNMP
Security	802.1X
Ports	48 x 10/100/1000 Mbps RJ45 ports, 4 x 1G SFP slots