TP-Link T1600G-52PS - 3. Configuration Example

179
22.2 show port isolation interface
Description
The show port isolation interface command is used to display the forward
port list of a port/LAG.
Syntax
show port isolation interface [ gigabitEthernet port | port-channel lagid ]
Parameter
port —— The number of Ethernet port you want to show its forward port list,
in the format of 1/0/2.
lagid —— The ID of LAG you want to show its forward port list, ranging from 1
to 6.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the forward-list of port 1/0/2:
T1600G-52TS# show port isolation interface gigabitEthernet 1/0/2
Display the forward-list of all Ethernet ports and LAGs:
T1600G-52TS# show port isolation interface