202
Example
Create a PoE holiday named “LaborDay”, and configure the start date as
October 1st and the end date as October 3rd:
T1600G-52PS(config)# power holiday LaborDay start-date 05/01 end-date
05/03
25.7 holiday
Description
The holiday command is used to configure holiday mode for the Time-range
of the switch. The holiday will be excluded from the Time-range you created if
the Holiday mode is Exclude.
Syntax
holiday { exclude | include }
Parameter
exclude
——The final Time range will be the intersection of the Absolute Time
and the Periodic Time, with Holiday excluded.
include
—— The Holiday has no effect on the Time-range, which means the
final Time-range will be the intersection of the Absolute Time and Periodic
Time.
Command Mode
Power Time-range Configuration Mode
Example
Create a holiday mode time-range for the PoE time-range named “tRange3”
and configure PoE time-range of the switch excludes the PoE holiday:
T1600G-52PS(config)# power time-range tRange3
T1600G-52PS(config-time-range)# holiday exclude
25.8 power inline consumption (interface)
Description
The power inline consumption command is used to configure the power limit
the corresponding port can supply.
Syntax
power inline consumption {
power-limit
| auto | class1 | class2 | class3 | class4 }
To Next Page
Loading...
Need help?
General