TP-Link T1600G-52PS Cli Reference Guide

347
no ip dhcp relay information custom
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable the switch to customize the option 82 field:
T1600G-52TS(config)# ip dhcp relay information custom
35.6 ip dhcp relay information circuit-id
Description
The ip dhcp relay information circuit-id command is used to specify the
custom circuit ID when option 82 customization is enabled. To clear the
circuit ID, please use no ip dhcp relay information circuit-id command.
Syntax
ip dhcp relay information circuit-id circuitID
no ip dhcp relay information circuit-id
Parameter
circuitID —— Specify the circuit ID, ranging from 1 to 64 characters.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Specify the circuit ID as “TP-Link”:
T1600G-52TS(config)# ip dhcp relay information circuit-id TP-Link

TP-Link T1600G-52PS Specifications

General

Brand	TP-Link
Model	T1600G-52PS
Category	Switch
Language	English