135
17.13 reboot-schedule
Description
This reboot-schedule command is used to configure the switch to reboot at
a certain time point. To delete the reboot schedule settings, please use the
reboot-schedule cancel command.
Syntax
reboot-schedule at
time
[
date
] [ save_before_reboot ]
reboot-schedule in
interval
[ save_before_reboot ]
reboot-schedule cancel
Parameter
time
—— Specify the time point for the switch to reboot, in the format of
hh:mm.
date
—— Specify the date for the switch to reboot, in the format of
DD:MM:YYYY. The date should be within 30 days.
save_before_reboot
—— Save the configuration file before the switch
reboots.
interval
—— Specify a time period after which the switch reboots. It ranges
from 1 to 43200 minutes.
cancel —— Delete the reboot schedule settings.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
User Guidelines
In the command reboot-schedule at
time
[
date
] [ save_before_reboot ], if
no date is specified and the time you set here is later than the time that this
command is executed, the switch will reboot later that day; otherwise the
switch will reboot at the time point the next day.
Example
Specify the switch to save the configuration files and reboot in 200 minutes,:
T1600G-52TS(config)# reboot-schedule in 200 save_before_reboot
To Next Page
Loading...
Need help?
General