260
Parameter
vlan-id-list
—— The ID list of the VLAN desired to modify configuration,
ranging from 1 to 4094, in the format of 1-3, 5.
port-list
—— Forbid the specified ports as being router ports. Packets sent
from multicast routers to these ports will be discarded.
port-channel-id
—— Forbid the specified port-channels as being router ports.
Packets sent from multicast routers to these port-channels will be discarded.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Forbid the Ethernet ports 1/0/1-3 as being router ports in VLAN 1 :
T1600G-52TS(config)# ipv6 mld snooping vlan-config 1
router-ports-forbidden interface gigabitEthernet 1/0/1-3
28.12 ipv6 mld snooping multi-vlan-config
Description
The ipv6 mld snooping multi-vlan-config command is used to create
Multicast VLAN. To delete the corresponding Multicast VLAN, please use no
ipv6 mld snooping multi-vlan-config command. To restore the default
values, please use no ipv6 mld snooping multi-vlan-config with specified
parameters.
Syntax
ipv6 mld snooping multi-vlan-config [
vlan-id
] [ rtime
router-time
| mtime
member-time
| rport interface { gigabitEthernet
port-list
| port-channel
lagid
}
]
no ipv6 mld snooping multi-vlan-config [ rtime
router-time
| mtime
member-time
| rport interface { gigabitEthernet
port-list
| port-channel
lagid
}
]
Parameter
vlan-id
—— The ID of the multicast VLAN desired to create or modify, ranging
from 2 to 4094. If not specified, the default multicast VLAN will be selected.
To Next Page
Loading...
