37
Example
Configure the priority of the Voice VLAN as 5:
T1600G-52TS(config)# voice vlan priority 5
6.4 voice vlan mac-address
Description
The voice vlan mac-address command is used to create Voice VLAN OUI. To
delete the specified Voice VLAN OUI, please use no voice vlan mac-address
command.
Syntax
voice vlan mac-address
mac-addr
mask
mask
[ description
descript
]
no voice vlan mac-address
mac-addr
Parameter
mac-addr
—— The OUI address of the voice device, in the format of
XX:XX:XX:XX:XX:XX.
mask
—— The OUI address mask of the voice device, in the format of
XX:XX:XX:XX:XX:XX.
descript
——Give a description to the OUI for identification which contains 16
characters at most.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Create a Voice VLAN OUI described as TP-Phone with the OUI address
00:11:11:11:11:11 and the mask address FF:FF:FF:00:00:00:
T1600G-52TS(config)#voice vlan mac-address 00:11:11:11:11:11 mask
FF:FF:FF:00:00:00 description TP-Phone
To Next Page
Loading...
Need help?
General