TP-Link T1600G-52PS - Show Mac Address-Table Aging-Time; Show Mac Address-Table Max-Mac-Count

120
Example
Clear the information of all static address entries:
T1600G-52TS(config)# clear mac address-table static
16.10 show mac address-table aging-time
Description
The show mac address-table aging-time command is used to display the
Aging Time of the MAC address.
Syntax
show mac address-table aging-time
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the Aging Time of the MAC address:
T1600G-52TS(config)# show mac address-table aging-time
16.11 show mac address-table max-mac-count
Description
The show mac address-table max-mac-count interface gigabitEthernet
command is used to display the security configuration of all ports or the
specified port.
Syntax
show mac address-table max-mac-count { all | interface gigabitEthernet
port }
Parameter
all —— Displays the security information of all the Ethernet ports.
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode