TP-Link T1600G-52PS Cli Reference Guide

225
26.23 show spanning-tree active
Description
The show spanning-tree active command is used to display the active
information of spanning-tree.
Syntax
show spanning-tree active
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the active information of spanning-tree:
T1600G-52TS(config)# show spanning-tree active
26.24 show spanning-tree bridge
Description
The show spanning-tree bridge command is used to display the bridge
parameters.
Syntax
show spanning-tree bridge [ forward-time | hello-time | hold-count | max-age
| max-hops | mode | priority | state ]
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the bridge parameters:
T1600G-52TS(config)# show spanning-tree bridge

TP-Link T1600G-52PS Specifications

General

Brand	TP-Link
Model	T1600G-52PS
Category	Switch
Language	English