131
17.7 location
Description
The location command is used to configure the system location. To clear the
system location information, please use no location command.
Syntax
location [
location
]
no location
Parameter
location
—— Device Location. It consists of 32 characters at most. It is
“SHENZHEN” by default.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Configure the system location as SHENZHEN:
T1600G-52TS(config)# location SHENZHEN
17.8 contact-info
Description
The contact-info command is used to configure the system contact
information. To clear the system contact information, please use no
contact-info command.
Syntax
contact-info [
contact_info
]
no contact-info
Parameter
contact_info
—— Contact Information. It consists of 32 characters at most. It
is “www.tp-link.com” by default.
Command Mode
Global Configuration Mode
To Next Page
Loading...
Need help?
General