256
28.6 ipv6 mld snooping immediate-leave
Description
The ipv6 mld snooping immediate-leave command is used to configure the
Fast Leave function for port. To disable the Fast Leave function, please use
no ipv6 mld snooping immediate-leave command.
Syntax
ipv6 mld snooping immediate-leave
no ipv6 mld snooping immediate-leave
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet / interface port-channel / interface range port-channel)
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Enable the Fast Leave function for port 1/0/3:
T1600G-52TS(config)# interface gigabitEthernet 1/0/3
T1600G-52TS(config-if)# ipv6 mld snooping immediate-leave
28.7 ipv6 mld snooping drop-unknown
Description
The ipv6 mld snooping drop-unknown command is used to enable the
unknown multicast packets filter function. To disable this function, please use
no ipv6 mld snooping drop-unknown command. By default, it is disabled.
Syntax
ipv6 mld snooping drop-unknown
no ipv6 mld snooping drop-unknown
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Enable unknown multicast filter function:
T1600G-52TS(config)# ipv6 mld snooping drop-unknown
To Next Page
Loading...
Need help?
General