272
Parameter
vlan-id
——The VLAN ID selected to display.
ipv6_multicast_addr
—— IPv6 address of the multicast group.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display all the multicast entries in VLAN 5:
T1600G-52TS#show ipv6 mld snooping groups vlan 5
Display information of the multicast group with the IPv6 address ff80::1234 in
VLAN 5:
T1600G-52TS#show ipv6 mld snooping groups vlan 5 ff80::1234
28.29 show ipv6 mld snooping groups
Description
The show ipv6 mld snooping groups command is used to display the
information of all MLD snooping groups. It can be extended to some other
commands to display the dynamic and static multicast information of a
selected VLAN.
Syntax
show ipv6 mld snooping groups [ vlan
vlan-id
]
[ count | dynamic | dynamic
count | static | static count ]
Parameter
vlan-id
——The VLAN ID selected to display the information of all multicast
items.
count—— The numbers of all multicast groups.
dynamic—— Display dynamic multicast groups.
dynamic count—— The numbers of all dynamic multicast groups.
static—— Display static multicast groups.
static count—— The numbers of all static multicast groups.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
To Next Page
Loading...
Need help?
General